Two Hole Pipe Straps
Download Cut Sheet

Standard Dimensions:

  • Hole Diameter: 13/32"

  • Hole Spacing (From End): 13/32"
    Accommodates 3/8"
    Hardware

  • Hole Spacing (On Center): 1-5/8"

  • Width: 1-5/8"

  • Thickness: 3/8"
Part No. A (in.) B (in.) Bolt Size (in.) Material Size (in.) Design Load (lbs)* Type 1
PS050 0.84 4.84 1/2 1/4 X 1-5/8 135
PS075 1.05 5.05 1/2 1/4 X 1-5/8 135
PS100 1.315 5.315 1/2 1/4 X 1-5/8 135
PS150 1.9 5.9 1/2 1/4 X 1-5/8 135
PS200 2-3/8 6.375 1/2 1/4 X 1-5/8 135
PS250 2-7/8 6.875 1/2 1/4 X 1-5/8 135
PS300 3-1/2 7.5 1/2 1/4 X 1-5/8 135
PS350 4 8 1/2 1/4 X 1-5/8 135
PS400 4-1/2 8.5 1/2 1/4 X 1-5/8 175
PS500 5-9/16 9.563 1/2 1/4 X 1-5/8 175
PS600 6-5/8 10.625 1/2 1/4 X 1-5/8 175
PS800 8-5/8 12.625 1/2 1/4 X 1-5/8 225
PS1000 10-3/4 15.75 5/8 1/4 X 1-5/8 225
PS1200 12-3/4 16.25 5/8 1/4 X 1-5/8 225
PS1400 14 18 5/8 3/8 X 1-5/8 250
PS1600 16 20 5/8 3/8 X 1-5/8 250
PS1800 18 23 5/8 3/8 X 1-5/8 250





*Design loads shown represent a 3:1 safety factor.
Bolts and channel nuts are sold separately.
When bolting onto 15/8" or 11/2" channel a 11/4" long bolt is required.
Aickinstrut Two Hole Pipe Straps are designed for use in securing pipe, conduit and ducts to Aickinstrut Channel. Two hole fiberglass straps can also be used independently from the channel for surface mounting. All sizes of the straps are suitable for load bearing applications.
The two hole pipe straps are manufactured from a fire-retardant, glass reinforced polyester resin. For extreme chemical environments, the straps can be manufactured from vinyl ester resin. Larger diameter straps for special applications are also available. Contact the factory for pricing and availability of vinyl ester and large diameter straps. Two hole pipe straps should not be torqued above recommended values.